To connect your PS4 controller, plug it into the USB C-to-A adapter with a USB cable. Once it's connected, the LED light on the controller should turn on, indicating that it's been detected. To connect your DualShock 4 controller to the adapter, first press and hold the button on the adapter until the light on the back starts flashing. On Windows 8 and 10, you can usually do so via PC Settings > PC and devices > Bluetooth. Press and hold the PlayStation and Share buttons simultaneously for a couple of seconds. The light bar I’m having the same issue. Screen says, "Connect the DUALSHOCK 4 using the USB cable and then press the PS button." I’m using the original cables and they work on my friends PS4, so they are ok. If i boot in Safe Mode i still get the same screen message but with SAFE MODE in the top left. I can’t get past it no matter what i try. Connect the DualShock 4 with the USB cable or pair it via Bluetooth (hold the PS and Share buttons until the light bar flashes, then pair it using the Start > Settings > Devices > Bluetooth menu. You may need to enter "0000" as the pairing code). From there, just follow the instructions in the DS4Windows app. You will have to use a paper clip to reach the button though. Make sure PS4 is on. Hold PS button on DS4. Use a paperclip or mechanical pencil (something thing and sturdy) to hit the reset button on the back of the controller while it's plugged it. Then press the PS Button and you should be golden. 2) make sure if the ps4 support option is unchecked (!) or now uncheck it. 3) confirm. 4) turn your controller on. 5) launch the game. Works for me in every game that has problems with it (RDR or The Witcher 3 for example). The controller and the game must always be switched off when changing this option. OZQHaBv. 2nd thing: Remove the Bluetooth pairing for the controller (s). Install DS4, if you haven't already. Go to its settings, and access the Bluetooth pairing Windows control panel via the hyperlink in the DS4 driver settings. DO NOT Access it directly through Windows - access it via that hyperlink. Try uninstalling and reinstalling the driver if you previously installed it. How to clean install PS4 game controller driver in Windows10. Go to SEARCH, type DEVICE MANAGER and click that. Go to HUMAN INTERFACE DEVICES , Right click your USBinput Device and select update Driver. Select BROWSE MY COMPUTER FOR DRIVER SOFTWARE . Switch. * Go to System Setting > Controller and Sensors > turn on Pro Controller Wired Communication. 1. Connect the USB Wireless Adapter to your Switch dock. 2. Press pair button on the USB Wireless Adapter, LED starts to blink rapidly. 3. Press SHARE+PS button for 3 seconds to enter its pairing mode (this is required for the very first time If you're PS4 controller won't connect to your PS4 or other devices, follow the steps I've outlined below.If you have a dualshock 4 controller currently conn PS4 Remote Play: Using the DualShock 4 with PlayStation's Remote Play app is relatively painless since both PC and Mac have built-in support. The DualShock 4 is more or less plug-and-play. PS4 model: CUH-1215A. So far I have tried: -Testing my cables in other systems (USB) they work. -Used another Dualshock and does the same (blinks once in white and does nothing) -Change to another USB cable (cellphone) and does the same (blinks once in white and does nothing) -Turn off the PS4, remove the power cable and waited 20 minutes with

can t connect dualshock 4 to ps4